Description
| Features: | |||
| 1. Compact size with stable performance. | |||
| 2. Support antenna isolation detection. | |||
| 3. Designed for indoor application. | |||
| 4. MGC available for both uplink and downlink. | |||
| 5. AGC to control output power at its maximum power level. | |||
| 6. Low interference & Oscillation prevention. | |||
| 7. Cost-effective for practical solutions. | |||
| 8. Extend phone battery life. |
Specifications:
|
Frequency Range |
Uplink |
Downlink |
|||
|
900+1800+2100 |
890-915/1710-1785/1920-1980MHz |
935-960/1805-1880/2110-2170MHz |
|||
| Gain | 65dB±2dB | 70dB±2dB | |||
| Output Power | 17dBm±2dBm | 23dBm±2dBm | |||
| Band width | Wide Band | ||||
| Manual Gain Control | 31dB / 1dB Step | ||||
| ALC | ≥ 25dB | ||||
| Ripple in Band | 8dB | ||||
| Noise Figure | ≤ 6dB | ||||
| VSWR | ≤ 2.0 | ||||
| Intermodulation Products | ≤ -40dBc | ||||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm/30KHz | |||
| 1~12.75GHz | ≤ -30dBm/30KHz | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Impedance | 50Ω | ||||
| Power Supply | AC 90-264V, DC 10V/6A | ||||
| Power LED | Power indicator | ||||
| Alarm LED | Red | Self oscillation or Strong input signal | |||
| Green | Normal | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Switch | Power Switch | ||||
| Cooling | Heatsink Convection cooling | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -10°C ~ +55°C | ||||
| Environment Conditions | IP40(Indoor) | ||||
| Installation Type | Wall Installation | ||||
| Size | 268mm*58mm*239mm | ||||
| Weight |
< 5.5Kg |
||||
Reviews
There are no reviews yet.