Description
Features: | |||
1. Compact size with stable performance. | |||
2. Support antenna isolation detection. | |||
3. Designed for indoor application. | |||
4. MGC available for both uplink and downlink. | |||
5. AGC to control output power at its maximum power level. | |||
6. Low interference & Oscillation prevention. | |||
7. Cost-effective for practical solutions. | |||
8. Extend phone battery life. |
Specifications:
Frequency Range | Uplink | Downlink | |||
GSM 900MHz
DCS/LTE 1800MHZ |
890 – 915/
1710-1785MHz |
935 – 960/
1805-1880MHz |
|||
Gain | 75dB±2dB | 80dB±2dB | |||
Output Power | 25dBm±2dBm | 27dBm±2dBm | |||
Band width | Wide Band | ||||
Manual Gain Control | 31dB / 1dB Step | ||||
ALC | >20dB | ||||
Ripple in Band | ≤ 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation | ≤ -40dBc | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-264V,DC 9V/5A | ||||
Power LED | Power indicator | ||||
Alarm LED | Red | Self oscillation or Strong input signal | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power Switch,Manual Gain Control Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Installation | ||||
Size | 268mm*58mm*335 mm | ||||
Weight | < 5Kg |
Reviews
There are no reviews yet.